Filters
Close

Polypipe 160mm 45 Degree Channel Bend UG682

Polypipe 160mm 45 Degree Channel Bend UG682 are used at the bottom of a manhole and allow access to the incoming/ outgoing flows through the pipework ; can be used as an alternative to plastic chamber bases.
Availability: In stock
SKU: UG682
£53.14 incl vat

Polypipe 160mm 45 Degree Channel Bend UG682 are used at the bottom of a manhole and allow access to the incoming/ outgoing flows through the  pipework ; can be used as an alternative to plastic chamber bases.The bends come with plain ends and are made from strong, durable PVCu. The use of silicone lubricant on all seals will facilitate jointing.

  • Manufacturered to BS EN 1401 and/or  BS4660:2000 where applicable.
  • PVCu construction provides strength and durability.
  • Ease of installation
  • Innovative seal and snap-cap system allows push fit joints.
  • Full matching selection of fittings and ancillaries.

Polypipe 160mm 45 Degree Channel Bend UG682 are used at the bottom of a manhole and allow access to the incoming/ outgoing flows through the  pipework ; can be used as an alternative to plastic chamber bases.The bends come with plain ends and are made from strong, durable PVCu. The use of silicone lubricant on all seals will facilitate jointing.

  • Manufacturered to BS EN 1401 and/or  BS4660:2000 where applicable.
  • PVCu construction provides strength and durability.
  • Ease of installation
  • Innovative seal and snap-cap system allows push fit joints.
  • Full matching selection of fittings and ancillaries.

*
*
*
*