Fascia & Soffit Accessories

Stainless Steel Pins are ideal for use with PVC boards, fascias and soffits to provide a professional finish.

Half Round 90 degree gutter angles are used at the corners of the installation. As half round gutter is a symmetrical system, these fittings can be used on either external or internal corners.

Left-Hand and Right-Hand Ogee Gable Boxes supplied to do both sides of the gable end. Available in a variety of colours. Fast user friendly installation. Durable and light.

Left-Hand and Right-Hand Ogee Gable Boxes supplied to do both sides of the gable end. Available in a variety of colours. Fast user friendly installation. Durable and light.

Ogee gutter angles are used at the corners of the installation. The best way to understand the difference between an internal and an external corner is to remember that the flat side of the fitting always fits against the fascia board.

The ogee fascia system is a traditional ‘s’ curved style which includes the 10mm thick fascia board and a full range of accessories to ensure a neat and professional installation. The ogee fascia system comes in White or Black.

Ogee gutter angles are used at the corners of the installation. Internal Angles are most often found where two gutters meet at the bottom of a valley.

MFP Plain PVC External Angles are moulded to the same profile as the fascias. Each fitting is 300mm long and is internally marked with dimensions for ease of use.

The H channels are mounted to the posts to form a frame for which the lattice panel can be put into.

Finials are a more decorative way of covering the joint of the roof. To enable the bargeboard system to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.

The MFP Plain PVC Fascia Joiner is a trim used to cover the expansion gap that must be left between two boards. The joiner is fixed to one board using superglue and the joint is sealed on the other board with silicon sealant for a tidy finish, allowing the whole installation to expand and contract safely along its length.

The PVC Single J Channel is 5 metres in length and available in a range of different colours. Providing a professional neat finish, this is easily to handle, install, and cut to the required length if necessary.

40mm Polytop Nails are manufactured for use with fascia and soffit boards providing a quality finish. This comes in a pack of 250 in either black or white.